Euroceiver Frontpanel (Eurorack)

C-EUR-01

Euroceiver module frontpanel by Hallik Engineering. Natural aluminium with black silkscreen labels. 4HP.

D1 Frontpanel (Eurorack)

C-EUR-02

D1 Digital Expander "gates" module frontpanel by Hallik Engineering. Natural aluminium with black silkscreen labels. 4HP.

D2 Frontpanel (Eurorack)

C-EUR-03

D2 Digital Expander "clocks" module frontpanel by Hallik Engineering. Natural aluminium with black silkscreen labels. 4HP.

D3 Frontpanel (Eurorack)

C-EUR-04

D3 Digital Expander "triggers" module frontpanel by Hallik Engineering. Natural aluminium with black silkscreen labels. 4HP.

A1 Frontpanel (Eurorack)

C-EUR-05

The A1 - Analog Expander module frontpanel by Hallik Engineering. Natural aluminium, with black silkscreen labels. 6HP.

SEQ v4+ 40x2 OLED protector

C-SDP-01

Precision milled SEQ v4+ display protector (for 40x2 OLEDs) - a replacement, if your original gets scratched. This is a single unit, a SEQ v4+ requires two protectors. Protected by a layer of tape.

SEQ v4+ activity matrix protector

C-SDP-02

Precision milled SEQ v4+ activity matrix protector (for dual 8x8 LED matrices) - a replacement, if your original activity matrix protector gets scratched. Protected by a layer of tape.

SEQ v4+ LH JA Case (Blue/White)

C-SEQ-01L

"Left hand" SEQ v4+ case designed by Hallik Engineering. Fully painted with silkscreen labels. Includes milled display windows and blanking plate. Optionally rack mountable (needs rack kit).

SEQ v4+ RH JA Case (Blue/White)

C-SEQ-01R

"Right hand" SEQ v4+ case designed by Hallik Engineering. Fully painted with silkscreen labels. Includes milled display windows and blanking plate. Optionally rack mountable (needs rack kit).

SEQ v4+ Rack Mount Kit

C-SEQ-02

SEQ v4+ rack mount kit. The 19 inch rack ears are milled for a perfect fit and are painted in the same color scheme as the SEQ v4+. Needs 136mm (3U and three millimeters) of rack height.

AL4002A OLED, 40x2 Characters, White

D-OLW-01

40x2 character OLED, white pixels, 3.3V supply, HD44780 compatible controller, parallel/SPI/I2C interfaces

5pcs ALPS STEC12E08 encoders

E-STC-01

Our standard encoders. They have proven to be highly reliable after years of use. They include a pushbutton, e.g. for encoder input acceleration.

2pcs low-profile 2x25 pin female headers

H-25F-01

Female headers to attach the waveshare Core407V MCU board to the wCore. This low-profile variant is required to allow the wCore PCB to fit into the SEQ v4+ case.

PJ398SM jack (x10)

J-301-01

10 pcs PJ398SM vertical mount 3.5mm jacks for Eurorack modular. Includes hex nuts.

SEQ v4+ Eurorack Modules Essential Kit

K-EUR-01

A set of Eurorack PCBs, frontpanels and essential parts at a discount! Rack usage: up to 22HP, case depth 50mm. Needs further parts to be completed. Does not include required SEQ v4+/v4.

SEQ v4+ Enhanced LH Essential Kit

K-SFE-01L

MIDIbox SEQ v4+ enhanced edition kit. LH case incl. rack kit (optional, needs 3U and 3mm of rack height), PCBs, UI parts, light|shields and L4 caps. Needs further parts to be completed.

SEQ v4+ Enhanced RH Essential Kit

K-SFE-01R

MIDIbox SEQ v4+ enhanced edition kit. RH case incl. rack kit (optional, needs 3U and 3mm of rack height), PCBs, UI parts, light|shields and L4 caps. Needs further parts to be completed.

SEQ v4+ Enhanced Version Upgrade Kit

K-SUP-01

Transform your SEQ v4+ to the newest look - contains L4 keycaps, light|shields and optionally mountable 19" rack ears. Needs 136mm (3U and three millimeters) of rack height.

10pcs LED Green Clear 2x3x4mm

L-G-01

Green, 2x3x4mm, ~2mA current using a 1k current limiting resistor @5V

2pcs LED Mini Matrix, 8x8, White

L-M-01

Common cathode, 20mm x 20mm. Used on the new JA PCB of the MIDIbox SEQ v4+, e.g. for track position indication. This set contains two pieces.

10pcs LED Red Clear 2x3x4mm

L-R-01

Red, 2x3x4mm, ~7mA current using a 470R current limiting resistor @5V

5pcs RGB LED, common cathode

L-RGB-01

Superflux RGB LED with a flat top. Suitable for midiphy projects involving illuminated Matias switches.

10pcs LED White Clear 2x3x4mm

L-W-01

White, 2x3x4mm, ~2mA current using a 1k current limiting resistor @5V

10pcs LED Color Mix Clear 2x3x4mm

L-X-01

Contains 2pcs of each red, green, blue, orange, white. Ideal for RES-SD/LoopA Core status indicator LEDs. Check color with a coin cell or DMM in diode test mode.

MCU Core407V, 1MB flash, bootloader

M-407-02

Waveshare Core407v with bootloader. Directly upload firmware using MIOS Studio via a USB cable; no ST-Link required! 1MB flash memory.

4pcs PIC16F88, MIDIbox I2C firmware

M-I2C-01

These PICs are already flashed with the MIDIbox I2C firmware. Used in the MIDI IIC boards (P-COR-04).

wCore PCB and USB PCB

P-COR-01

This is the main MIDIbox Core PCB: a carrier board for the Waveshare Core407v MCU.

RES-SD PCB

P-COR-02

This board offers a SD card socket, a reset button and a handful of state indication LEDs. It is required to store user data on removable flash media.

MIDI8 PCB

P-COR-03

Provides 4 MIDI INs and 4 MIDI OUTs. Can accomodate a BLM port instead of MIDI IN/OUT 4.

I2C PCB

P-COR-04

Combines four classic MIDIbox I2C modules on a single board for four MIDI outs. Requires four PIC16F88 with I2C firmware.

LINETX PCB

P-COR-05

A slightly more compact version of the MBHP Line Driver Transmitter.

LINERX PCB

P-COR-06

A slightly more compact version of the MBHP Line Driver Receiver.

Euroceiver PCB (Eurorack)

P-EUR-01

Version of the line driver receiver suitable for Eurorack mounting. Selectable +5V source from USB, on-board regulator, through the DB-25 cable, or the Eurorack power buss.

Octal PCB (Eurorack)

P-EUR-02

Front panel PCB with 3.5mm sockets and LED indicators. Works with both digital and analog expanders.

Binaire PCB (Eurorack)

P-EUR-03

Interfaces a 74HC595 shift register to modular using op amp buffers. Chain multiple boards for more "digital" signals like gates, clocks and triggers.

Transmute8 PCB (Eurorack)

P-EUR-04

The main board for the analog expander. Processes and scales incoming CV from the DAC and distributes it to the panel PCB.

SuperDAC PCB (Eurorack)

P-EUR-05

Quality DAC PCB for the analog expander using MAX5500 SSOPs and separate voltage references.

SEQv4+ ENC-PLATE PCB

P-SEQ-01

Stabilizes the Matias switches and also carries eight encoders with switch functions connected to the lemec board below. Two PCBs required per SEQ v4+.

SEQv4+ LE-MEC LH PCB

P-SEQ-02L

Left-hand v4+ user interface board with illuminated Matias and Apem (MEC) switches. SRIO DIN for button matrix and encoder scanning.

SEQv4+ LE-MEC RH PCB

P-SEQ-02R

Right-hand v4+ user interface board with illuminated Matias and Apem (MEC) switches, plus Beat LED. SRIO DIN for button matrix and encoder scanning, extra registers for activity matrix.

SEQv4+ JA PCB

P-SEQ-03

Jog/Activity Indicator board carrying the data jog wheel encoder, the new v4+ mode selector, additional MEC switches and two 8x8 mini LED activity matrices.

5pcs Light|Shield Standard

S-LIS-01

Light isolation for backlit Matias switches: ideal for fitting before keycaps are installed (pictured switch is not included)

5pcs Matias Quiet Click Tactile Switch

S-MQC-01

The quiet, but still very tactile version of the Matias "click" switch. Highly recommended!

5pcs K85 cap, black (for K88 knob)

T-K85-B

Black knob caps for the K88 knobs.

5pcs K88 knobs, black, d-shaft

T-K88-B

Our recommended 6mm D-shaft encoder knobs for the Seq V4+ and the LoopA. Don't forget to order the K85 knob caps!

Datawheel Knob DK30-105

T-KDW-01

Datawheel knob used in the MIDIbox Seq v4+. 6mm D-shaft mounting, 30mm outer diameter. Perfect for our standard encoders (E-STC-01).

Euro fastening hardware A1, D1-D3

W-EUR-01

For assembling our Eurorack PCBs. Contents sufficient for all modules A1, D1, D2, D3. Kit contains 10 pcs M2 standoffs and 20 pcs M2 screws.

SEQ v4+ Case fastening hardware

W-SEQ-01

SEQ v4+ hardware set: M3 screws and nuts, M3 5mm, 10mm and 20mm hex standoffs required for case installation of all PCBs in the midiphy SEQ v4+ cases.

SEQv4+ LE-MEC fastening hardware

W-SEQ-02

Spaces LeMEC and Plate PCBs for Matias switch installation. Contains 18x 5mm standoffs, 36x M3 nuts, suffices for a full SEQ v4+ (two LeMEC/Plate sandwiches).

SEQ v4+ LH JA Gate/FSW Cable

W-SEQ-03L

SEQ v4+ cable for left-handed cases. Connects footswitch/external gate input with the JA PCB, so that the sequencer can handle these external signals.

SEQ v4+ RH JA Gate/FSW Cable

W-SEQ-03R

SEQ v4+ cable for right-handed cases. Connects footswitch/external gate input with the JA PCB, so that the sequencer can handle these external signals.