AL4002A OLED, 40x2 Characters, White

D-OLW-01

40x2 character OLED, white pixels, 3.3V supply, HD44780 compatible controller, parallel/SPI/I2C interfaces

256x64px OLED, White (for LoopA)

D-OLW-02

256x64px OLED for LoopA, 16 grayscale levels, 3.3V supply, parallel/SPI/I2C interfaces. Temporary single price increase due to global parts supply shortage.

128x128px OLED, Full RGB (for MatriX)

D-OLW-03

128x128px OLED for MatriX, full RGB color, 3.3V supply, parallel/SPI interfaces.

5pcs ALPS STEC12E08 encoders

E-STC-01

Our standard encoders. They have proven to be highly reliable after years of use. They include a pushbutton, e.g. for encoder input acceleration.

2pcs low-profile 2x25 pin female headers

H-25F-01

Female headers to attach the waveshare Core407V MCU board to the wCore. This low-profile variant is required to allow the wCore PCB to fit into the SEQ v4+ case.

MicroSD Memory Card Socket PJS008U-3000-0

I-SDC-01

MicroSD, vertical mount, through-hole (THT), memory card reader/interface.

PJ398SM jack (x10)

J-301-01

10 pcs PJ398SM vertical mount 3.5mm jacks for Eurorack modular. Includes hex nuts.

10pcs LED Blue Clear 2x3x4mm

L-B-01

Blue, 2x3x4mm, ~5mA current using a 470R current limiting resistor @5V

10pcs LED Green Clear 2x3x4mm

L-G-01

Green, 2x3x4mm, ~2mA current using a 1k current limiting resistor @5V

2pcs LED Mini Matrix, 8x8, White

L-M-01

Common cathode, 20mm x 20mm. Used on the new JA PCB of the MIDIbox SEQ v4+, e.g. for track position indication. This set contains two pieces.

10pcs LED Orange Clear 2x3x4mm

L-O-01

Orange, 2x3x4mm, ~6mA current using a 470R current limiting resistor @5V

10pcs LED Red Clear 2x3x4mm

L-R-01

Red, 2x3x4mm, ~7mA current using a 470R current limiting resistor @5V

5pcs ePixel RGB LEDs

L-RGB-02

5pcs ePixel RGB LEDs, ideal for backlighting Matias switches - unpack from vacuum bag right before soldering and solder at 300°C max.

5pcs cPixel RGB LEDs

L-RGB-03

5pcs cPixel RGB LEDs, ideal for backlighting Matias switches. Vac-packed for freshness! Solder at 300°C max.

10pcs LED White Clear 2x3x4mm

L-W-01

White, 2x3x4mm, ~2mA current using a 1k current limiting resistor @5V

10pcs LED Color Mix Clear 2x3x4mm

L-X-01

Contains 2pcs of each red, green, blue, orange, white. Ideal for RES-SD/LoopA Core status indicator LEDs. Check color with a coin cell or DMM in diode test mode.

MCU Core407V, 1MB flash, bootloader

M-407-02

Waveshare Core407v with bootloader. Directly upload firmware using MIOS Studio via a USB cable; no ST-Link required! 1MB flash memory.

4pcs PIC16F88, MIDIbox I2C firmware

M-I2C-01

These PICs are already flashed with the MIDIbox I2C firmware. Used in the MIDI IIC boards (P-COR-04).

5pcs Light|Shield Standard

S-LIS-01

Light isolation for backlit Matias switches: ideal for fitting before keycaps are installed (pictured switch is not included)

5pcs Matias Quiet Click Tactile Switch

S-MQC-01

The quiet, but still very tactile version of the Matias "click" switch. Highly recommended!

5pcs DCS Relegendable Keycap Clear, EX Mount

T-CCR-01

Ideal for mounting on Matias or ALPS keyswitches. These keycaps are fully transparent and relegendable: customize your own labels.

5pcs superQ Keycap

T-CCT-SQ

Quadratic blank RGB keycaps with light dispersion. Custom design to fit Matias (and ALPS) mechanical keyswitches. Perfect fit for the midiphy MatriX and LoopA!

5pcs K85 cap, black (for K88 knob)

T-K85-B

Black knob caps for the K88 knobs.

5pcs K88 knobs, black, d-shaft

T-K88-B

Our recommended 6mm D-shaft encoder knobs for the Seq V4+ and the LoopA. Don't forget to order the K85 knob caps!

Datawheel Knob DK30-105

T-KDW-01

Datawheel knob used in the MIDIbox Seq v4+. 6mm D-shaft mounting, 30mm outer diameter. Perfect for our standard encoders (E-STC-01).

5pcs DK16-190V3 knob, transparent

T-KWL-01

Transparent 6mm d-shaft knobs, also used by a big german synth manufacturer. :) Perfect for our standard encoders (E-STC-01).

5pcs Light|Shield Flex

S-LIS-02

Light isolation for backlit Matias switches: very flexible polymer material, ideal for refitting switches with preinstalled keycaps (pictured keycap and switch are not included)

5pcs L4 Superellipse DSA Keycap, EX Mount

T-CCT-L4

Custom design midiphy keycaps, made in the U.S.A. These keycaps have L4 superellipse background illumination bands and look awesome on all metal cases! Fit ALPS and Matias keyswitches.