product details
midiphy Wirescanner Full Kit
Product ID: K-UTL-02
DIY cable tester - look mum no microprocessor! Validate IDC8/10/16 and micromatch 8/10 ribbon cables using 16x16 LED matrix graphical visualization. Full kit, including all parts and enclosure.
Weight: 226 grams
Bill of Materials / Placement Guide
Label
Package
Name
Side
Part Link
Notes
The BOM checker 'bot says:
All parts referenced from the CAD master files have been validated. The BOM should be safe to order!*
* Disclaimer: although we have taken the best care possible, we cannot guarantee 100%
accuracy and we cannot be held liable for erroneous orders when using
this tool, including (but not limited to) incorrect quantities and/or
types of components ordered through midiphy or other suppliers.
Recommended products
These additional products may be of interest:
SEQ v4+ Enhanced LH Essential Kit
K-SFE-01L
MIDIbox SEQ v4+ enhanced edition kit. LH case incl. rack kit (optional, needs 3U and 3mm of rack height), PCBs, UI parts, light|shields and L4 caps. Needs further parts to be completed.
929.99 €
incl. VAT, excl. shipping
SEQ v4+ Enhanced RH Essential Kit
K-SFE-01R
MIDIbox SEQ v4+ enhanced edition kit. RH case incl. rack kit (optional, needs 3U and 3mm of rack height), PCBs, UI parts, light|shields and L4 caps. Needs further parts to be completed.
929.99 €
incl. VAT, excl. shipping
Free Shipping!
midiphy MatriX (with pro metal case) Essential Kit
K-MTX-01
midiphy MatriX Essential Kit with pro metal case. Further parts and a 12V/5A PSU are required (see BOM and PSU note).
1,189.99 €
incl. VAT, excl. shipping
Build Tutorial
Building the wirescanner is easy:
first solder all SMT parts (from the SMT parts bag), for ICs and diode make sure you observe the correct polarity, i.e. align IC package markers/dots with the respective silkscreen markers
then solder the micromatch headers from the THT connectors bag
then solder the four 8x8 matrix LEDs, align LED case labels with PCB silkscreen label text
finally solder all remaining THT connectors (from the THT connectors bag), making sure you align the IDC connectors with the PCB silkscreen outlines
You can solder the parts contained in the kit in any order, but we recommend to start with the "flattest" parts and solder the parts with the largest height in the end.
Important - 8x8 LED matrices alignment:
Align the text printed on the 8x8 LED matrix cases with the silkscreen labels "Matrix1" to "Matrix4"
first solder all SMT parts (from the SMT parts bag), for ICs and diode make sure you observe the correct polarity, i.e. align IC package markers/dots with the respective silkscreen markers
then solder the micromatch headers from the THT connectors bag
then solder the four 8x8 matrix LEDs, align LED case labels with PCB silkscreen label text
finally solder all remaining THT connectors (from the THT connectors bag), making sure you align the IDC connectors with the PCB silkscreen outlines
You can solder the parts contained in the kit in any order, but we recommend to start with the "flattest" parts and solder the parts with the largest height in the end.
Important - 8x8 LED matrices alignment:
Align the text printed on the 8x8 LED matrix cases with the silkscreen labels "Matrix1" to "Matrix4"